From stefan.gaechter at mavt.ethz.ch  Sat Sep  1 01:22:14 2007
From: stefan.gaechter at mavt.ethz.ch (Stefan Gachter)
Date: Sat, 01 Sep 2007 07:22:14 +0200
Subject: [referencer] Problems to install referencer on Ubuntu 7.04
In-Reply-To: <1188599120.11567.41.camel@LatitudeD600>
References: <1188599120.11567.41.camel@LatitudeD600>
Message-ID: <1188624134.11567.45.camel@LatitudeD600>

Thanks! That solved the problem. As a linux newbie, I was a little bit
puzzled...

On Sat, 2007-09-01 at 00:25 +0200, Stefan Gachter wrote:
> I tried to install referencer on Ubuntu 7.04, but I end up with the
> following error. Can anybody help? Thanks, Stefan
> 
> stefangachter at LatitudeD600:$ dpkg -i
> referencer_1.0.4-1~getdeb1_i386.deb 
> dpkg: requested operation requires superuser privilege
> stefangachter at LatitudeD600:$ sudo dpkg -i
> referencer_1.0.4-1~getdeb1_i386.deb 
> Selecting previously deselected package referencer.
> (Reading database ... 118329 files and directories currently installed.)
> Unpacking referencer (from referencer_1.0.4-1~getdeb1_i386.deb) ...
> dpkg: dependency problems prevent configuration of referencer:
>  referencer depends on libboost-regex1.33.1; however:
>   Package libboost-regex1.33.1 is not installed.
>  referencer depends on libcairomm-1.0-1; however:
>   Package libcairomm-1.0-1 is not installed.
>  referencer depends on libgconfmm-2.6-1c2 (>= 2.10.0-3); however:
>   Package libgconfmm-2.6-1c2 is not installed.
>  referencer depends on libglademm-2.4-1c2a; however:
>   Package libglademm-2.4-1c2a is not installed.
>  referencer depends on libglibmm-2.4-1c2a; however:
>   Package libglibmm-2.4-1c2a is not installed.
>  referencer depends on libgnome-vfsmm-2.6-1c2a (>= 2.14.0); however:
>   Package libgnome-vfsmm-2.6-1c2a is not installed.
>  referencer depends on libgnomecanvasmm-2.6-1c2a; however:
>   Package libgnomecanvasmm-2.6-1c2a is not installed.
>  referencer depends on libgnomemm-2.6-1c2a (>= 2.16.0); however:
>   Package libgnomemm-2.6-1c2a is not installed.
>  referencer depends on libgnomeuimm-2.6-1c2a (>= 2.16.0); however:
>   Package libgnomeuimm-2.6-1c2a is not installed.
>  referencer depends on libgtkmm-2.4-1c2a; however:
>   Package libgtkmm-2.4-1c2a is not installed.
> dpkg: error processing referencer (--install):
>  dependency problems - leaving unconfigured
> Errors were encountered while processing:
>  referencer
> 
> 
> 
> ---
> To unsubscribe, send a blank email to referencer-unsubscribe at icculus.org
> Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?60
> 
> 
-- 
Stefan G?chter                  
PhD Student/Research Assistant
Swiss Federal Institute of Technology (ETHZ)
Autonomous Systems Lab (ASL)
Office CLA E11.2
Tannenstrasse 3
8092 Z?rich, Switzerland
++41-44-632-73-95
stefan.gaechter at mavt.ethz.ch
http://www.asl.ethz.ch

----------------------------------------------------------------
Please consider the environment before printing this email.
----------------------------------------------------------------



From david.coeurjolly at liris.cnrs.fr  Tue Sep  4 05:21:02 2007
From: david.coeurjolly at liris.cnrs.fr (David Coeurjolly)
Date: Tue, 04 Sep 2007 11:21:02 +0200
Subject: French translation
Message-ID: <46DD237E.6040202@liris.cnrs.fr>

Hi all,

The French translation is available in Launchpad.  What is the process
to make it available in the svn trunk ?

regards
david

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 252 bytes
Desc: OpenPGP digital signature
URL: <http://icculus.org/pipermail/referencer/attachments/20070904/b6b5c035/attachment.pgp>

From jcspray at icculus.org  Tue Sep  4 05:59:07 2007
From: jcspray at icculus.org (John Spray)
Date: Tue, 04 Sep 2007 10:59:07 +0100
Subject: [referencer] French translation
In-Reply-To: <46DD237E.6040202@liris.cnrs.fr>
References: <46DD237E.6040202@liris.cnrs.fr>
Message-ID: <1188899947.7880.0.camel@localhost>

On Tue, 2007-09-04 at 11:21 +0200, David Coeurjolly wrote:
> Hi all,
> 
> The French translation is available in Launchpad.  What is the process
> to make it available in the svn trunk ?

Great, thank you.  My habit is to merge the launchpad translations into
svn shortly before a release, no further action required on your part.

Regards,
John



From giorgis.m at gmail.com  Mon Sep 10 09:57:03 2007
From: giorgis.m at gmail.com (Georgios Michalogiorgakis)
Date: Mon, 10 Sep 2007 15:57:03 +0200
Subject: CrossRef metadata
Message-ID: <200709101557.04232.giorgis.m@gmail.com>

Hello to all, 

  I have been using Referencer for some time, and it's a great program to 
handle a huge number of pdf's. 

Now that the crossref.org site asks for user registration Referencer cannot 
get the metadata of papers.  Unfortunately adding the username and password 
of an openURL account in the Edit-->Preferences-->Metadata Lookup URL using 
pid=username:password or req_dat=username:password does not work.  

Is there a known workaround for this, or an alternative site as we wait for 
the next release of Referencer?

Thanks,
Giorgos 


From jcspray at icculus.org  Mon Sep 10 10:03:34 2007
From: jcspray at icculus.org (John Spray)
Date: Mon, 10 Sep 2007 15:03:34 +0100
Subject: [referencer] CrossRef metadata
In-Reply-To: <200709101557.04232.giorgis.m@gmail.com>
References: <200709101557.04232.giorgis.m@gmail.com>
Message-ID: <1189433015.7664.22.camel@localhost>

On Mon, 2007-09-10 at 15:57 +0200, Georgios Michalogiorgakis wrote:
> Is there a known workaround for this, or an alternative site as we
> wait for the next release of Referencer?

Short answer: not that I know of.  I've added a note to the referencer
homepage to warn people that crossref isn't working any more.  I will
look into alternatives in due course.  arXiv still works, for the lucky
physicists in the audience.

Regards,
John



From jcspray at icculus.org  Wed Sep 12 11:53:13 2007
From: jcspray at icculus.org (John Spray)
Date: Wed, 12 Sep 2007 16:53:13 +0100
Subject: [Fwd: Referencer and CrossRef]
Message-ID: <1189612393.7621.16.camel@localhost>


Gavin has some advice that some may find helpful:
-------------- next part --------------
An embedded message was scrubbed...
From: Gavin Simpson <gavin.simpson at ucl.ac.uk>
Subject: Referencer and CrossRef
Date: Wed, 12 Sep 2007 16:44:14 +0100
Size: 2797
URL: <http://icculus.org/pipermail/referencer/attachments/20070912/8e693491/attachment.eml>

From joesimon11 at googlemail.com  Fri Sep 21 12:04:30 2007
From: joesimon11 at googlemail.com (Joe Simon)
Date: Fri, 21 Sep 2007 18:04:30 +0200
Subject: Error whilst adding new documents to library
Message-ID: <4d32fdad0709210904y6f2b0f62y1401c07614e1102b@mail.gmail.com>

Hi

I'm using the referencer for some time now, but recently a problem ocurred
to which a cannot find any solution. Whenever I want to add a new document
to my library I get the error message "Error in row 1, chracter 1: Document
has to start with an element (e.g.<book>)".
Thank you,
Joe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://icculus.org/pipermail/referencer/attachments/20070921/f262f833/attachment.htm>

From jcspray at icculus.org  Fri Sep 21 12:55:36 2007
From: jcspray at icculus.org (John Spray)
Date: Fri, 21 Sep 2007 17:55:36 +0100
Subject: [referencer] Error whilst adding new documents to library
In-Reply-To: <4d32fdad0709210904y6f2b0f62y1401c07614e1102b@mail.gmail.com>
References: <4d32fdad0709210904y6f2b0f62y1401c07614e1102b@mail.gmail.com>
Message-ID: <1190393736.2398.23.camel@localhost>

On Fri, 2007-09-21 at 18:04 +0200, Joe Simon wrote:
> I'm using the referencer for some time now, but recently a problem
> ocurred to which a cannot find any solution. Whenever I want to add a
> new document to my library I get the error message "Error in row 1,
> chracter 1: Document has to start with an element ( e.g.<book>)".

This is symptomatic of recent changes to crossref.org which have removed
anonymous access to metadata.  You can either silence this by enabling
"Work Offline", or create a crossref account and do something like this:
http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?60:mss:187:200709:kpejodfppmdjefgiknmp

John



From joesimon11 at googlemail.com  Fri Sep 28 05:42:24 2007
From: joesimon11 at googlemail.com (Joe Simon)
Date: Fri, 28 Sep 2007 11:42:24 +0200
Subject: [referencer] Error whilst adding new documents to library
In-Reply-To: <1190393736.2398.23.camel@localhost>
References: <4d32fdad0709210904y6f2b0f62y1401c07614e1102b@mail.gmail.com>
	 <1190393736.2398.23.camel@localhost>
Message-ID: <4d32fdad0709280242y3dd05314hd43dc9b74d9cdb5@mail.gmail.com>

Thanks for your advise, but onfortunately creating an account for
crossref.org requires payment, or is there any possibility for graduate
students to join for free?
Thanks,
Joe

2007/9/21, John Spray <jcspray at icculus.org>:
>
> On Fri, 2007-09-21 at 18:04 +0200, Joe Simon wrote:
> > I'm using the referencer for some time now, but recently a problem
> > ocurred to which a cannot find any solution. Whenever I want to add a
> > new document to my library I get the error message "Error in row 1,
> > chracter 1: Document has to start with an element ( e.g.<book>)".
>
> This is symptomatic of recent changes to crossref.org which have removed
> anonymous access to metadata.  You can either silence this by enabling
> "Work Offline", or create a crossref account and do something like this:
>
> http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?60:mss:187:200709:kpejodfppmdjefgiknmp
>
> John
>
>
> ---
> To unsubscribe, send a blank email to referencer-unsubscribe at icculus.org
> Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?60
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://icculus.org/pipermail/referencer/attachments/20070928/ce5c8528/attachment.htm>

